TrimTite STAINLESS STEEL DECK SCREWS

INSTALLATION:


 

TRIMTITE SCREW INTO HARDWOOD DECKING!

 

TRIMTITE SCREW INTO COMPOSITE DECKING (Trex, Fiberon, etc.)


Drive TrimTite screw without
pre-drilling.

Countersink TrimTite 1/8" below surface.
The result is a tiny dimple or mushroom effect.

Close screw hole by pinching the
dimple together.

After closing screw hole, hit the dimple with a hammer.

The TrimTite screw disappears and leaves a flat smooth surface.

 

HOW MANY TO USE AND WHAT LENGTH

4" nominal width (3.5" actual width) boards require 525 fasteners per 100sf at 16" joist spacing.

6" nominal width (5.5" actual width) boards require 350 fasteners per 100sf at 16" joist spacing.


1" nominal thickness (.75" actual thickness) boards should use 2" length screws.

5/4" nominal thickness (1" actual thickness) boards should use 2-1/2" length screws.